Universal Adaptor

The Universal Adaptor uses a 3M™ VHB™  4952 (very high bond) adhesive, which bonds to smooth, non-textured, non-porous surfaces such as plastic and metal.

We highly recommend using a case if your phone has a glass back.

For tape specification please refer to the 3M™ website: 3M™ VHB™

Not all phones or cases are compatible with the 3M™ VHB™ tape. The table below should be used as a reference guide only. Please ensure a sufficient bond has been achieved before use.

Suitable Materials	Not suitable Materials
Poly Carbonate (PC)	Rubber - Thermo Plastic Rubber/Thermo Plastic Urethane (TPR/TPU)
ABS	Leather
Aluminium	Silicon
Un-coated Glass	Hydrophobic-coated glass (Also known as anti-fingerprint glass, which is found on most modern smartphones)
	Soft touch paint or rubberised coatings
	Polypropylene (PP) eg, Lifeproof Fre Case Wood

 

Always ensure the application surface is thoroughly cleaned (with alcohol) and dry before applying the adaptor. The 3M™ VHB adhesive is a single-use adhesive; it is NOT re-usable.

	Wipe the surface down using an alcohol based cleaning agent. Make sure the residue has evaporated and the surface is dry before applying the adaptor.
	Peel the protective layer from the 3M adhesive.
	Position the Adaptor on the rear of your device/case using the center marking lines on the Adaptor.
	Press down firmly on the adaptor to achieve a good bond. The tape will achieve maximum adhesion after 24 hours. Always test that the tape has bonded securely before use.